WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 64

Page:
  1. 1
  2. 2
  3. 3
  1. Trend TEMP/LR/A Template lock recess
    £72.79 Excl. VAT £87.35 Incl. VAT

    Out of stock

  2. Trend KWJ900 Kitchen Worktop Jig 900mm
    £145.79 Excl. VAT £174.95 Incl. VAT

  3. Trend KWJ700 Kitchen Worktop Jig 700mm
    £112.14 Excl. VAT £134.57 Incl. VAT

  4. Trend HR/JIG Hot Rod JIg
    £64.39 Excl. VAT £77.27 Incl. VAT

    Groove pitch=50.0 mm  Groove length=100, 200, 300 and 400 mm  Length=700 mm  Width=390 mm  Thickness=12 mm  Weight=3.5 kg
  5. Trend LOCK/JIG/A Lock Jig Large
    £109.56 Excl. VAT £131.47 Incl. VAT

  6. Trend LOCK/JIG/B Adjustable trade lock jig
    £108.52 Excl. VAT £130.22 Incl. VAT

  7. Trend MT/JIG/EURO Mortise and Tenon Jig Euro (Metric)
    £212.05 Excl. VAT £254.46 Incl. VAT

  8. Trend RBTRNG22/10 Routabout Ring Set 22mm 10 Off
    £66.46 Excl. VAT £79.75 Incl. VAT

    Max. load capacity=200 kg
  9. Trend RBTRNG18/100 Routabout Ring Set 18mm 100 Off
    £471.26 Excl. VAT £565.51 Incl. VAT

    Out of stock

    Max. load capacity=200 kg
  10. Trend RBTRNG22/100 Routabout Ring Set 22mm 100 Off
    £566.58 Excl. VAT £679.90 Incl. VAT

    Out of stock

    Max. load capacity=200 kg
  11. Trend RBTRNG18/250 Routabout Ring Set 18mm 250 Off
    £1,148.33 Excl. VAT £1,378.00 Incl. VAT

    Out of stock

    Max. load capacity=200 kg
  12. Trend RBT/3 Routabout Jig 22mm x 1/4" Shank
    £77.96 Excl. VAT £93.55 Incl. VAT

  13. Trend RBT/1 Routabout Jig 18mm x 1/4" Shank
    £72.88 Excl. VAT £87.46 Incl. VAT

  14. Trend RBT/4 Routabout Jig 22mm x 1/2" Shank
    £77.96 Excl. VAT £93.55 Incl. VAT

  15. Trend RBT/2 Routabout Jig 18mm x 1/2" Shank
    £72.88 Excl. VAT £87.46 Incl. VAT

  16. Trend MT/JIG Mortise and Tenon Jig
    £212.05 Excl. VAT £254.46 Incl. VAT

  17. Trend HINGE/JIG Hinge recessing Jig Single Piece
    £227.95 Excl. VAT £273.54 Incl. VAT

  18. Trend H/JIG/A Hinge jig two part in case
    £227.95 Excl. VAT £273.54 Incl. VAT

  19. Trend H/JIG/C Hinge jig Skeleton two part in case
    £227.95 Excl. VAT £273.54 Incl. VAT

  20. Trend AR/JIG Aperture Radius Jig
    £103.08 Excl. VAT £123.70 Incl. VAT

  21. Trend ELLIPSEJ/A Ellipse jig type A
    £218.64 Excl. VAT £262.37 Incl. VAT

  22. Trend DG/JIG Draining groove Jig
    £125.00 Excl. VAT £150.00 Incl. VAT

    Out of stock

    Fall=0.5 degree  Groove pitch=50.0 mm  Groove length=455 mm  Slat width=19.8 mm  Length=625 mm  Height=585 mm  Width=12 mm  Weight=4.3kg
  23. Trend CRB Combination router base
    £83.38 Excl. VAT £100.06 Incl. VAT

  24. Trend CDJ600/01 Craft dovetail 600mm 1/4 half blind
    £76.20 Excl. VAT £91.44 Incl. VAT

    Material thickness.=8 mm - 12 mm  Material width up to=600 mm  
  25. Trend CDJ600/02 Craft dovetail 600mm 1/2 comb box
    £78.14 Excl. VAT £93.77 Incl. VAT

    Material thickness.=8 mm - 20 mm  Material width up to=600 mm  

Back top top

1-25 of 64

Page:
  1. 1
  2. 2
  3. 3
Contact Us