Our other sites:


Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.


240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

101-113 of 113

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Trend HR/JIG Hot Rod JIg
    £62.80 Excl. VAT £75.36 Incl. VAT

    Groove pitch=50.0 mm  Groove length=100, 200, 300 and 400 mm  Length=700 mm  Width=390 mm  Thickness=12 mm  Weight=3.5 kg
  2. Trend CASE/1001 Carry case for KWJ700/900 and COMBI1002
    £34.85 Excl. VAT £41.82 Incl. VAT

    Length outside=1250 mm  Height ouside=415 mm
  3. Trend M/KWS01 Kitchen Worktop Jig Offset Scriber
    £24.85 Excl. VAT £29.82 Incl. VAT

    Offset=8.65 mm  Use with jigs=All Trend worktop jigs  Use with jigs= That use a 30mm guide and 12.7mm cutter
  4. Trend BUSH/600 Bush for COMBI600 alloy 20mm 1 off
    £6.79 Excl. VAT £8.15 Incl. VAT

    Diameter= 20 mm  Overall length=37 mm  Pin length=9 mm  Pin diameter=10 mm  Min. jig thickness=10 mm  Suits jig=COMBI600, TT/KWJ600
  5. Trend KWJ/PIN/4 KWJ900 10mm pin pack of 4
    £8.68 Excl. VAT £10.42 Incl. VAT

    D=10 mm
  6. Trend KWJ700 Kitchen Worktop Jig 700mm
    £109.41 Excl. VAT £131.29 Incl. VAT

  7. Trend KWJ900 Kitchen Worktop Jig 900mm
    £142.23 Excl. VAT £170.68 Incl. VAT

  8. Trend TEMP/LB/A Template letterbox
    £54.76 Excl. VAT £65.71 Incl. VAT

    Template size=326 mm x 290 mm x 8 mm  Letterbox plate sizes  220 mm x 50 mm  210 mm x 60 mm  200 mm x 60 mm
  9. Trend LOCK/JIG Lock Jig

    Trend LOCK/JIG Lock Jig

    £90.87 Excl. VAT £109.04 Incl. VAT

  10. Trend TEMP/LR/A Template lock recess
    £72.79 Excl. VAT £87.35 Incl. VAT

  11. Trend LOCK/JIG/A Lock Jig Large
    £106.90 Excl. VAT £128.28 Incl. VAT

  12. Trend LOCK/JIG/B Adjustable trade lock jig
    £96.18 Excl. VAT £115.42 Incl. VAT

  13. Trend RBTRNG18/100 Routabout Ring Set 18mm 100 Off
    £471.26 Excl. VAT £565.51 Incl. VAT

    Out of stock

    Max. load capacity=200 kg

Back top top

101-113 of 113

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Contact Us