Our other sites:


Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.


240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

101-125 of 410

  1. Trend DWL/3/50 Dowels 8 x 40mm 50 off
    SKU: DWL/3/50

    Trend DWL/3/50 Dowels 8 x 40mm 50 off

    Dowels grooved

    £2.07 Excl. VAT £2.48 Incl. VAT

    D=8 mm  Overall length=40 mm  
  2. Trend CDJ300 Craft Dovetail Jig 300mm
    £104.99 Excl. VAT £125.99 Incl. VAT

    Rating=Craftsman  Dovetail size=12.7 mm  Workpiece width max.=300 mm  Workpiece thickness min.=12 mm  Workpiece thickness max.=25 mm  Guide bush size=15.8 mm  Router base dia. max=180 mm
  3. Trend KWJ900 Kitchen Worktop Jig 900mm
    £135.58 Excl. VAT £162.70 Incl. VAT

  4. Trend TEMP/IN/FDL Template inlay fleur de lys
    £9.34 Excl. VAT £11.21 Incl. VAT

    Out of stock

    Width=197 mm  Height=239 mm  Thickness=6 mm
  5. Trend SM/PRO Scribe-Master Pro c/w cutter
    £266.52 Excl. VAT £319.82 Incl. VAT

    Max. board height=195mm  Max. board thickness=32 mm  Min. component length=300 mm  Weight=5.92kg  
  6. Trend SM/BP Scribe-Master Pro carry case
    £28.73 Excl. VAT £34.48 Incl. VAT

    Size=655mm x 420mm  To fit into the case the feet of the jig will need to be removed.
  7. Trend SM/TSP Scribe-Master Tenon Slide Plate
    £38.33 Excl. VAT £46.00 Incl. VAT

    Max. working length=190 mm  Max. tenon length adj.=50 mm  Max. cutter dia.=22 mm
  8. Trend SMC/03X8MMHSS Scribe-Master cutter 4x40x90mm x 8mm HSS

    Trend SMC/03X8MMHSS Scribe-Master cutter 4x40x90mm x 8mm HSS

    Scribemaster cutter for hardwood

    £31.59 Excl. VAT £37.91 Incl. VAT

    D=4 mm  C=40 mm  OL=90 mm  Shank Diameter=8 mm  For use on hardwood
  9. Trend TEMP/SCM/PIN1 Template pin 1/4 inch self centering mortise
    £4.58 Excl. VAT £5.50 Incl. VAT

    Shank=1/4 inch
  10. Trend SS/B5/12 Shelf support Brass Plated 12 off
    £2.61 Excl. VAT £3.13 Incl. VAT

    Pin=5 mm  Overall length=23 mm  Load capacity=100kg    Load capacity applies to four shelf supports being evenly distributed
  11. Trend SS/M5/12 Shelf support metal 5mm 12 off
    £2.61 Excl. VAT £3.13 Incl. VAT

    Pin=5 mm  Overall length=16.5 mm  
  12. Trend SS/P5/12 Shelf support plastic 5mm 12 off
    £2.61 Excl. VAT £3.13 Incl. VAT

    Pin=5 mm  Load capacity=100kg
  13. Trend TEMP/SS/A Template shelf support 32mm Centre
    £40.67 Excl. VAT £48.80 Incl. VAT

    Size 500 mm x 130 mm x 8 mm
  14. Trend TEMP/SSD/5MM Template shelf support drill bit guide
    £24.62 Excl. VAT £29.54 Incl. VAT

    Drill diameter=5 mm
  15. Trend SMC/02X1/4HSS Scribe-Master cutter 4x40x100mm x 1/4 HSS
    SKU: SMC/02X1/4HSS

    Trend SMC/02X1/4HSS Scribe-Master cutter 4x40x100mm x 1/4 HSS

    Scribemaster cutter for softwood

    £28.73 Excl. VAT £34.48 Incl. VAT

    D=4 mm  C=40 mm  OL=100 mm  Shank Diameter=1/4 inch  For use on softwood and MDF*  *The abrasive nature of MDF will lead to premature tool wear.
  16. Trend SM/MKP Scribe-Master Quick Mount Kit
    £22.00 Excl. VAT £26.40 Incl. VAT

    Mitre saw stand requirements  Mounting brackets with slots to accept 8mm bolts.  SM/PRO mounting bracket hole positions  Centre to centre (D)=195 mm to 280mm  Centre to centre (W)=399 mm  
  17. Trend RTS/1000 Router T square 1000mm
    £54.38 Excl. VAT £65.26 Incl. VAT

    Overall length=1060 mm  Blade size=1000m x 6 mm  Butt size= 300 mm x 16 mm  Square tolerance=0.5mm over 1m.
  18. Trend TEMP/LUC/57 Template set letters 57mm uppercase
    £39.11 Excl. VAT £46.93 Incl. VAT

    Size=396 x 110 x 5 mm
  19. Trend TEMP/NUC/57 Template set number 57mm uppercase
    £19.51 Excl. VAT £23.41 Incl. VAT

    Size=360 x 110 x 5 mm
  20. Trend TEMP/LN57X8MM Letter number cutter/Bush pack1
    £13.73 Excl. VAT £16.48 Incl. VAT

  21. Trend TEMP/LN57X1/4 Letter number cutter/Bush pack2
    £13.73 Excl. VAT £16.48 Incl. VAT

  22. Trend TEMP/PD/R/E Template panel door set rad 316mm
    £13.73 Excl. VAT £16.48 Incl. VAT

    D=425 mm  D2=335 mm  C=102 mm  R=316 mm  Door width possible=515 to 555 mm  
  23. Trend TEMP/PD/R/A Template panel door set rad 138mm
    £15.47 Excl. VAT £18.56 Incl. VAT

    D=223 mm  D2=155 mm  C=102 mm  R=138 mm  Door width possible=300 to 440 mm
  24. Trend TEMP/PD/R/F Template panel door set rad 372mm
    £13.73 Excl. VAT £16.48 Incl. VAT

    D=470 mm  D2=398 mm  C=102 mm  R=372 mm  Door width possible=565 to 600 mm
  25. Trend TEMP/PD/R/G Template Panel Door Set Rad 400mm
    £13.73 Excl. VAT £16.48 Incl. VAT

    D=526 mm  D2=440 mm  C=102 mm  R=400 mm  Door width possible=620 to 660 mm

Back top top

101-125 of 410

Contact Us