JIGS, TABLES & ACCESSORIES
Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.
IMPORTANT SAFETY NOTICE for 2018
240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK
Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911 www.trend-uk.com
-
-
-
SKU: HR/JIG
Trend HR/JIG Hot Rod JIg
£69.79 Excl. VAT £83.75 Incl. VATGroove pitch=50.0 mm Groove length=100, 200, 300 and 400 mm Length=700 mm Width=390 mm Thickness=12 mm Weight=3.5 kg -
SKU: RBTRNG22/10
Trend RBTRNG22/10 Routabout Ring Set 22mm 10 Off
£64.85 Excl. VAT £77.82 Incl. VATMax. load capacity=200 kg -
-
-
-
-
-
SKU: CDJ600/01
Trend CDJ600/01 Craft dovetail 600mm 1/4 half blind
£74.34 Excl. VAT £89.21 Incl. VATMaterial thickness.=8 mm - 12 mm Material width up to=600 mm -
SKU: CDJ300/05
Trend CDJ300/05 Craft dovetail 300mm 1/2 through
£99.25 Excl. VAT £119.10 Incl. VATMaterial thickness.=8 mm - 17 mm Material width up to=300 mm -
SKU: CDJ300/03
Trend CDJ300/03 Craft dovetail 300mm 8mm comb box
£68.59 Excl. VAT £82.31 Incl. VATMaterial thickness.=8 mm - 15 mm Material width up to=300 mm -
SKU: CDJ300/02
Trend CDJ300/02 Craft dovetail 300mm 1/2 comb box
£68.59 Excl. VAT £82.31 Incl. VATMaterial thickness.=8 mm - 20 mm Material width up to=300 mm -
SKU: CDJ300/01
Trend CDJ300/01 Craft dovetail 300mm 1/4 half blind
£64.55 Excl. VAT £77.46 Incl. VATMaterial thickness.=8 mm - 12 mm Material width up to=300 mm -
SKU: CDJ600/02
Trend CDJ600/02 Craft dovetail 600mm 1/2 comb box
£76.23 Excl. VAT £91.48 Incl. VATMaterial thickness.=8 mm - 20 mm Material width up to=600 mm -
SKU: DGP/IP/SF
TREND DGP/IP/SF DG/PRO INNER PLATE STRAIGHT FAN
£82.04 Excl. VAT £98.45 Incl. VATOut of stock
-
SKU: DGP/IP/SS
TREND DGP/IP/SS DG/PRO INNER PLATE STRAIGHT SLOT
£82.04 Excl. VAT £98.45 Incl. VATOut of stock
-
£77.24 Excl. VAT £92.69 Incl. VAT
-
SKU: DGP/IP/LF
TREND DGP/IP/LF DG/PRO INNER PLATE LIGHTNING FAN
£82.04 Excl. VAT £98.45 Incl. VATOut of stock
-
SKU: DGP/IP/HR
TREND DGP/IP/HR DG/PRO INNER PLATE HOT ROD
£82.04 Excl. VAT £98.45 Incl. VATOut of stock
-
SKU: CURV/8X1000
TREND CURV/8X1000 MINI FLEXIBLE CURVE GUIDE 8MM X 1000MM
£76.64 Excl. VAT £91.97 Incl. VAT -
SKU: DGP/IP/CF
TREND DGP/IP/CF DG/PRO INNER PLATE CURVED FAN
£82.04 Excl. VAT £98.45 Incl. VATOut of stock
-
SKU: RTI/PLATE/A
TREND RTI/PLATE/A ROUTER TABLE INSERT PLATE ALLOY
£68.53 Excl. VAT £82.24 Incl. VAT -
-
SKU: RTS/1000
Trend RTS/1000 Router T square 1000mm
£73.38 Excl. VAT £88.06 Incl. VATOverall length=1060 mm Blade size=1000m x 6 mm Butt size= 300 mm x 16 mm Square tolerance=0.5mm over 1m.