WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

76-100 of 395

  1. Trend CRB/SF CRB side fence
    SKU: CRB/SF

    Trend CRB/SF CRB side fence

    Combination router base side fence

    £15.08 Excl. VAT £18.10 Incl. VAT

    Length=270 mm  Width=35 mm  Thickness=15 mm  Cutter diameter max.=30 mm
  2. Trend CRB/CR CRB cranked rods
    SKU: CRB/CR

    Trend CRB/CR CRB cranked rods

    Combination router base cranked rods

    £17.21 Excl. VAT £20.65 Incl. VAT

    Diameter=7 mm  Rod centres=60.3 mm to 174 mm
  3. Trend DG/JIG Draining groove Jig
    £108.40 Excl. VAT £130.08 Incl. VAT

    Fall=0.5 degree  Groove pitch=50.0 mm  Groove length=455 mm  Slat width=19.8 mm  Length=625 mm  Height=585 mm  Width=12 mm  Weight=4.3kg
  4. Trend ELLIPSEJ/A Ellipse jig type A
    £150.14 Excl. VAT £180.17 Incl. VAT

  5. Trend ELLIPSEJ/1 Extension bar 500mm x 12.7mm
    £25.82 Excl. VAT £30.98 Incl. VAT

    500 mm x 12.7 mm
  6. Trend H/JIG/C Hinge jig Skeleton two part in case
    £199.10 Excl. VAT £238.92 Incl. VAT

  7. Trend H/JIG/A Hinge jig two part in case
    £199.10 Excl. VAT £238.92 Incl. VAT

    Out of stock

  8. Trend HINGE/JIG Hinge recessing Jig Single Piece
    £195.93 Excl. VAT £235.12 Incl. VAT

  9. Trend H/JIG/B Hinge jig B two part phenolic
    £173.28 Excl. VAT £207.94 Incl. VAT

  10. Trend TEMP/BH/A Template butt hinge
    £38.36 Excl. VAT £46.03 Incl. VAT

    Size= 214 mm x 135 mm x 8 mm  Door thickness min.=34 mm  Door thickness max.=44 mm  Hinge recess length=75 mm  Hinge recess length=100 mm  
  11. Trend CRB/TB CRB trimming base
    SKU: CRB/TB

    Trend CRB/TB CRB trimming base

    Combination router base trim base

    £24.31 Excl. VAT £29.17 Incl. VAT

    Lipping width with copy follower max.=16 mm  Lipping width without copy follower max.=25 mm  Lipping projection max.=6 mm  Cutter diameter max.=25 mm  Length=210 mm  Width=65 mm  Thickness=7 mm
  12. Trend CRB Combination router base
    £60.28 Excl. VAT £72.34 Incl. VAT

  13. Trend BS/JIG Belfast sink jig
    £96.98 Excl. VAT £116.38 Incl. VAT

    Length= 655 mm  Width= 600 mm  Thickness=12 mm  Weight=3.6kg
  14. Trend BSJ/PIN/4 BS/JIG 10mm pin pack of 4
    £7.62 Excl. VAT £9.14 Incl. VAT

    D=10 mm
  15. Trend CDJ300 Craft Dovetail Jig 300mm
    £104.99 Excl. VAT £125.99 Incl. VAT

    Out of stock

    Rating=Craftsman  Dovetail size=12.7 mm  Workpiece width max.=300 mm  Workpiece thickness min.=12 mm  Workpiece thickness max.=25 mm  Guide bush size=15.8 mm  Router base dia. max=180 mm
  16. Trend CDJ300/05 Craft dovetail 300mm 1/2 through
    £73.88 Excl. VAT £88.66 Incl. VAT

    Material thickness.=8 mm - 17 mm  Material width up to=300 mm  
  17. Trend CDJ300/03 Craft dovetail 300mm 8mm comb box
    £48.06 Excl. VAT £57.67 Incl. VAT

    Material thickness.=8 mm - 15 mm  Material width up to=300 mm  
  18. Trend CDJ300/02 Craft dovetail 300mm 1/2 comb box
    £48.06 Excl. VAT £57.67 Incl. VAT

    Material thickness.=8 mm - 20 mm  Material width up to=300 mm  
  19. Trend CDJ300/01 Craft dovetail 300mm 1/4 half blind
    £45.22 Excl. VAT £54.26 Incl. VAT

    Material thickness.=8 mm - 12 mm  Material width up to=300 mm  
  20. Trend CDJ600 Craft Dovetail Jig 600mm
    £173.28 Excl. VAT £207.94 Incl. VAT

    Rating=Craftsman  Dovetail size=12.7 mm  Workpiece width max.=600 mm  Workpiece thickness min.=12 mm  Workpiece thickness max.=25 mm  Guide bush size=15.8 mm  Router base dia. max=180 mm
  21. Trend CDJ600/02 Craft dovetail 600mm 1/2 comb box
    £53.41 Excl. VAT £64.09 Incl. VAT

    Material thickness.=8 mm - 20 mm  Material width up to=600 mm  
  22. Trend CDJ600/01 Craft dovetail 600mm 1/4 half blind
    £52.08 Excl. VAT £62.50 Incl. VAT

    Material thickness.=8 mm - 12 mm  Material width up to=600 mm  
  23. Trend D/STAND/A Door holder stand
    £41.32 Excl. VAT £49.58 Incl. VAT

    Maximum door thickness=55 mm  Minimum door thickness=32 mm  Maximum door weight=50 kg  Weight=2.2 kg
  24. Trend N/COMPASS/AEX Router Compass 8mm extension Bars
    £20.05 Excl. VAT £24.06 Incl. VAT

    Radius increase=440 mm
  25. Trend Hot rod 200mm Stainless Steel one off
    SKU: HR/200

    Trend Hot rod 200mm Stainless Steel one off

    Stainless Steel hot rod

    £13.55 Excl. VAT £16.26 Incl. VAT

    Overall length=200 mm  Diameter=12 mm  

Back top top

76-100 of 395

Contact Us